Swim spa movers for Yorkville and Kendall County

How a swim spa move differs from a hot tub move

A swim spa is roughly twice the length and three to four times the dry weight of a family hot tub, so the equipment, crew and route planning scale up with it. The numbers below come straight from manufacturer spec pages.

Two details in that table shape the whole job. The length means a swim spa can’t pivot through a tight turn the way a 7-foot tub can, and dual-zone models like the 19DTAX carry two sets of pumps, heaters and plumbing, which means two zones to drain and more equipment to protect. For standard tubs, the parent page on hot tub and spa moving covers the basics.

The crane question, settled before anything is booked

Whether your swim spa can be moved without a crane depends on how much open, level ground lies between it and the street. Hydropool, a swim spa manufacturer, writes that most swim spas are delivered by crane and that rolling one in on rollers or dollies only works where there’s a great deal of wide-open space.

Amenity doesn’t provide crane service. So the honest first question is how the spa got there. If it rolled in through a wide side yard or across the driveway, it can usually leave the same way. If it was lifted over the house or a fence, a ground-level move may not be possible, and you’d need a crane company, which is a separate contractor and a separate conversation.

Measuring the route for a swim spa

Measure every pinch point between the spa and where a truck can park, then do the same at the new home, before the estimate. Geometry decides most swim spa moves:

• Spa dimensions from the spec sheet: length, width and height, plus brand, model and year.
• Narrowest gap: gates, side yards, the space between house and fence or between neighboring houses. Traveling on its edge, a spa needs at least its height in width (53 to 60 inches in the examples above); traveling flat, it needs its full width of roughly 8 feet.
• Overhead clearance: tipped on its edge, the spa stands roughly as tall as its normal width, close to 8 feet, so check eaves, gutters, low branches and utility lines.
• Turns: a 15- to 19-foot shell needs a long, open arc to change direction.
• Ground: slope, soft lawn, steps, retaining walls and landscape edging.
• Distance: how far the truck can park from the spa at both addresses.

Photos of the route from a few angles help, but the estimator will want to walk it in person. Our guide to what happens at an in-home estimate explains the visit.

Preparing a swim spa for the move

The owner’s prep list is the same in principle as for a hot tub, but every item is bigger: more water, a heavier electrical supply and more at stake at the destination.

• Drain every zone. The Bullfrog S180XD holds 1,856 gallons to its normal fill line, so start early and empty the hot tub zone too on dual-zone models.
• Clear the plumbing if it’s cold. Jacuzzi’s winterizing guide for hot tubs and swim spas warns that even a small amount of trapped water can crack lines when it freezes.
• Disconnect the power properly. Hydropool lists the 19DTAX as 240 V only, and your spec sheet shows your model’s supply. A licensed electrician disconnects it and reconnects it at the new home.
• Check the warranty. Sundance Spas notes some manufacturers void coverage when owners move a spa themselves. Ask your dealer what they require.
• Have the new pad finished. Hydropool says its swim spas must sit on a concrete pad or the warranty is void. Your contractor pours and cures it before moving day.
• Remove the extras. Steps, cover lifters, exercise tethers and loose accessories come off and get set aside.

Moving day for a swim spa

Swim spa moving days run longer than hot tub days, mostly because every step from the pad to the truck is slower with a longer, heavier shell.

1. Confirm it's readyThe crew checks that every zone is empty and the supply is disconnected, then walks the route again for anything that changed since the estimate.
2. Protect the shell and equipmentCabinet panels, corners and the equipment side get padded before the spa is lifted off its pad.
3. Move it to the truckThe spa travels at ground level along the planned path, with boards over soft ground where needed.
4. Load and secureAmenity runs multiple truck sizes, and the truck is chosen at the estimate with the spa’s length in mind. On local moves the truck carries one customer’s belongings.
5. Place it on the new padThe crew sets the spa where you direct on the finished pad. Your electrician reconnects it, and you or your dealer refill and start it up.

What shapes the time and cost of a swim spa move

Length, weight and access set the price, which Amenity gives you in writing after a free estimate. For local work in Kendall County and the neighboring collar counties, the Illinois Commerce Commission notes that moves may be billed by workers and hours, so time on site is the main driver:

• Spa length and dry weight, which set crew size and truck
• Route width, turns and overhead clearance at both homes
• Slope, steps and soft ground between pad and truck
• Single-zone or dual-zone model
• Distance between the two properties
• Anything that isn’t ready on the day, such as an unfinished pad or a supply still connected

Before you hire anyone for a job this size, check the license. Our list of moving company red flags shows how to look up a mover with the Illinois Commerce Commission.

Swim spa moves around Yorkville and Kendall County

The paperwork at the new house is yours, so line it up early. Yorkville’s building permit page lists concrete and paver patios and decks, and it covers projects involving electrical work, both of which usually come with a swim spa install. Other towns have their own rules, so call the building department wherever the spa is headed.

Crews dispatch from Amenity’s Plainfield warehouse and handle swim spas in places such as Oswego, Sandwich and Minooka, as well as around Yorkville.

If the spa is one part of a whole-house local move, mention it when you book so it’s planned with everything else. Two related jobs also come up often. If the swim spa is replacing an ordinary tub, the old one can go out through hot tub removal. If the new pad won’t be ready on time, ask at the estimate whether storage fits your model before you set a date.

More hot tub & spa moving services

Hot Tub Removal & DisposalOld tubs hauled away from the yard or deckLearn more →Hot Tub StorageStore a drained tub while you move or buildLearn more →

Back to Hot Tub & Spa Moving in Yorkville · all moving services

Available across the Yorkville area

• Oswego
• Montgomery
• Plano
• Sugar Grove
• Big Rock
• Plainfield
• Sandwich
• Aurora

Last reviewed November 11, 2026 by the Yorkville Movers team against Amenity Moving & Storage’s published service details and the public sources listed above.